Installation
Before your camera installation, ensure your vehicle’s windshield is dry.
Installations in damp conditions (i.e. humidity) risk inadequate camera adhesion to the window.
Many factors, such as your breath, weather, etc. can compromise your 3M™ VHB™ or similar adhesive tape, connection to the windshield, so please exert caution during the application process.
1. If there’s moisture on the windshield, turn on vehicle defrosters to warm and dry the windshield.
2. Ensure there are no chips or cracks in the windshield. If the windshield is compromised, device
application may cause chips or cracks to spread.
3. Clean the windshield with your alcohol wipe. Allow time to dry.
4. Remove any film left over from the solution.
5. Remove the plastic from the tape on the mounting bracket.
6. Apply your camera to the windshield.
7. Go outside the vehicle and check whether 80%–90% of the tape’s surface area connects with the glass.
Installer Note: If you don’t see proper adhesion, apply pressure to areas where the tape doesn’t
connect with the glass.